OEM Level Sensors For Liquid, Gas and Foam Applications

These economical level sensors and switches feature thermal dispersion technology with solid-state or relay contact outputs in a wide range of materials independent of conductivity or dielectric constant and can resist a high degree of coating. Typical applications include point detection in liquid/gas, liquid/liquid, liquid/foam and foam/gas interface applications.

OEM Level Sensors are manufactured in several standard designs including: Two-Wire Loop Powered, Insertion Type with Pigtail, Level and Temperature, Mass Level with Two-Wire Loop Powered, Integral Type, High Temperature and Wet/Dry.

两线环电级传感器are ideal for applications with installation constraints. Typical level applications include engine oil level monitoring, small container filling, low level alarm and dry to wet indication. FCI’s NuTec™ style level switch uses a two-wire control circuit in a NEMA Type 4X and explosion proof enclosure. Wetted parts are 300 series stainless steel.

带辫子级传感器的插入类型feature a pigtail connection and remote 4-wire control board that is ideal for small/ confined vessels and difficult to access locations. Wetted parts are 300 series stainless steel. CPVC with 300 series stainless steel or Hastelloy C-22 sensors are also available.

Level and Temperature Level Sensors特征级别点检测，带有温度的附加输出参数。可以将发射器配置为提供固态输出，并具有级别/接口和温度的变化。湿零件是300系列不锈钢。

带有2线环电级传感器的质量水平feature 2-wire loop powered small circuit board design that enables convenient mounting in customer's control system enclosure. Wetted parts are 300 series stainless steel.

Integral Type and Wet/Dry Level Sensors具有小尺寸，低成本和无运动零件以及24 VDC输入功率的组合，可为氯化水和其他腐蚀性介质以及其他水性或碳氢化合物液提供完美的解决方案。润湿零件是带有Hastelloy C-22传感器的CPVC。304不锈钢，辫子或M12连接器也可用于积分型传感器，316L不锈钢，辫子或M12连接器也可用于湿/干燥的传感器。

高温传感器feature pigtail connections from a small sensor to remote electronics for applications with process temperatures up to 450° F. Typical level applications include heating oil and coolant fluid reservoirs. Wetted parts are 300 series stainless steel.

除标准设计外，FCI还将为OEM规范创建自定义设计。FCI可以设计自定义流量或级别传感器，以满足任何过程媒体，线条大小，安装环境，温度，压力，校准和输出信号的要求。各种传感器设计符合行业标准，包括UL，CE，FM，ATEX，CSA等。FCI是注册和认证的ISO9001制造商。

Fluid Components International is a global company committed to meeting the needs of its customers through innovative solutions to the most challenging requirements for sensing, measuring and controlling air, gas, liquid, flow, level and temperature.

Fluid Components International -www.fluidcomponents.com