The units consists of three sections: the heavy-duty wall mounting rear and base through which the cables enter the enclosure; the main body and a solid or window lockable front door. The bodies and doors are independently hinged, with 120° opening to give unrestricted access to both the front and rear of the mounted equipment. All sections are constructed from 14-gauge steel, finished in RAL 7035 light gray. Seamless poured-in-place gaskets provide protection against dust, oil and water to NEMA type 3R, 12, 4 and IP66, enabling the enclosures to be installed in challenging industrial environments or outside locations. Ten sizes are available as standard, ranging from 16 in. high x 24 inch wide x 15 inch deep to 48 inch x 24 inch x 24 inch; non-standard sizes can also be produced. A pair of fixed 19 inch panel rails, tapped 10/32, are pre-installed at the front and additional optional mounting angles can be added at the rear of the body to support heavy equipment or provide a second patch breakout area from the main cabling. U heights range from 7U to 26U and the maximum static load ratings are 100 to 180 pounds depending on size.
>>有关此产品的更多信息，click here
Hammond Manufacturing
www.hammfg.com.
716.630.7030
