AutomationDirect adds IronHorse MTR2 series general purpose, rolled-steel AC motors

New MTR2 series IronHorse® general purpose, rolled-steel motors from AutomationDirect are available in 1-phase and 3-phase versions and offer better performance specifications, improved cosmetic appearance and quieter operation.

This content was submitted directly to this website by the supplier.

Feb 1st, 2018

New single-phase MTR2 rolled-steel motors are available in 1800 RPM, 115/230 VAC models. The motors are 56C frame, TEFC, and provide rigid base or C-face mounting. Nameplates include 60 & 50Hz specifications and reverse wiring instructions.

The 3-phase 208-230/460 VAC rolled steel MTR2 motors are available in 1800 and 3600 RPM models with TEFC (Totally Enclosed Fan Cooled) frames, cast aluminum end bells and removable mounting bases. Nameplates include 60 & 50Hz specifications.

MTR2-series motors start at $83.00, have a two-year warranty, meet RoHS and Low Voltage Directives, and are CSA and CE approved. Available accessories include replacement/spare bases, junction boxes, fans, fan shrouds and also Run / Start capacitors for 1-phase motors.

>>For more information,click here

1l S9xz Ql 1920 62b4c5d65aa2f

i950 Servo Drives from Lenze

Four of Lenze’s i950 drives were used to operate a juggling machine at Automate 2022.

Digital Twin, Analytics, and Cybersecurity Dominate at ROKLive 2022

Rockwell Automation’s annual event, presented in partnership with its Plex Systems division this year, featured demonstrations of FactoryTalk Optix, Emulate 3D, and a focus on software as a service.

道琼斯公司和西门子在MxD试验台。

Enabling the Industrial Workforce for a Mobile Future

Siemens, Dow, and MxD are working together to demonstrate how the mobile workforce of tomorrow can be realized with today’s technologies.

Ur Cobot Family Photo

Universal Robots Unveils New 20kg Payload Cobot

Universal Robots redesigned its collaborative robot technology to create the UR20—its longest reach and heaviest payload cobot. Target applications include palletizing and packaging.

Qualification and Validation Fluency: A Must Have for Highly Regulated Industries

In highly regulated industries, quality and validation procedures can be make or break, and getting them right requires working with system integrators who have industry-specific experience.

Cognex In-Sight 2800 | Machine Vision Made Simple

Cognex In-Sight 2800 | Machine Vision Made Simple

Cognex In-Sight 2800 vision system enables users of all skill levels to use the power of deep learning to automate error detection. See for yourself by entering for your chance to win one of five In-Sight 2800.

Inside the Investing Surge in Automation

Explore the growing interest around investing in industrial automation with our guest Jim Carlisle, managing director at Thomas H. Lee, a Boston-based private equity firm. Carlisle manages the firm's $900 million automation fund.

A Q69nb Eu 720 62aa2df5e0dc4

OnRobot Showcases Sander Tool for Cobots

Exhibited at Automate 2022, the OnRobot Sander can be used with a variety of collaborative robots from Universal Robots and other major suppliers.

Getty Images Guy Digital Factory (1)

Schneider Electric Continues its Open Automation Journey

Plug-and-produce hardware-independent software and agreements with Claroty and Intel accelerate the new era of automation software.

2206 Web Features

Making the Choice: Cables & Connectors

Though they don’t often receive the attention given to other automation technologies, cables and connectors are critical to the power and data transmission needs of industry’s digital transformation.

This image depicts how MQTT Sparkplug can be used to reduce the complexity of industrial device communications and connectivity. Source: Eclipse Sparkplug Working Group.

Plug-and-Play Coming to Industrial IoT

Launch of the Sparkplug Compatibility Program enables automation technology suppliers to certify compatibility with the Eclipse Sparkplug protocol and MQTT-based Internet of Things infrastructures.

4 Hardware Trends Driving the Evolution in Warehouse Automation

4 Hardware Trends Driving the Evolution in Warehouse Automation

As the market for warehouse automation grows, hardware will play an important role in the next generation of technological advancements. Take a closer look at four hardware trends worth watching.

Why OEE Still Matters

Though some say OEE (overall equipment effectiveness) is outdated, its use to continuously improve production operations across industry prove the value provided by this key metric.

Ubs D3m6 L 720 62a1270c62211

UR5E Cobot with 3D Scanner for Metrology Inspection

Universal Robots exhibited how its UR5E Series collaborative robots can be equipped with 3D scanners to automate metrology inspections at Automate 2022.

7u Vqn W Ny 720 629ff4f375db7

KUKA Exhibits End-to-End Production Cell

At Automate 2022, KUKA showcased how its various products can be used together to create an end-to-end production cell for the fast moving consumer goods segment.

Getty Images Fingerprint

A Digital Fingerprint to Combat Counterfeit Goods

Alitheon光学人工智能系统can authenticate products by simply taking a picture.

Brian May Hi Res Photo

Manufacturing in the Metaverse

The emerging metaverse continuum will transform how people interact with each other and with business data. Find out how this might impact industrial and manufacturing operations.

The HG-KR23K servo puts motion control logic within the drive itself, taking the load off of the PLC and simplifying programming.

Precise Automation Required for Pick-and-Pack Machine

使用三菱电机伺服电机和易达利gent drives enabled Hamrick Manufacturing to create a machine with a lower cost controller that reduced changeover times by nearly 98%.

Screen Shot 2022 06 06 At 10 50 17 Am

Creating the Monetary Information to Measure Equipment Efficiency Improvements

This column presents a simple example of the type of information needed to address the common deficiencies in typical financial accounting information.

Screen Shot 2022 05 19 At 12 42 59 Pm

Palletizer Upgrade? It’s Likely Overdue

Learn what you can to do upgrade and maintain your palletizing machines.

More in Home

Screen Shot 2022 06 06 At 10 21 27 Am

Siemens Digital Industries Software Focuses on Digital Transformation

Lean about what what shared at Siemens Digital Industries Software's analyst/media event this year.

The Raytek Marathon MM infrared temperature sensor from Fluke Process Instruments.

Sensors Help Increase Batch Capacity

Non-contact infrared sensors enabled global plastics and rubber processor Ilpea Industries Inc. to increase yields and reduce cycle times.

Michael Lehrich

The Significance of Historians

As the importance of data grows across industry, more attention needs to be paid when picking a data historization platform.

The Evolution of Robotics Engineering

Otto Motors and HP offer simulation and 3D printing technologies to improve robot performance.

Getting supply chain management and planning right is one of the most effective shock absorbers any food and beverage processor can have, shielding them from fluctuations in availability and demand.

How to Tame an Unpredictable Supply Chain

Supplies are being disrupted both coming and going for food and beverage manufacturers. Shifting philosophies, combined with a range of digital technologies, could help make operations more predictable and resilient.

Digital Twin image. Source: Siemens Digital Industries Software

Digital Twin Application Considerations

From the reach of the digital twin technology you choose to costs and data preparation issues, there are a number of factors to consider when looking to put a digital twin into practice.

Ladder Diagram example. Source: automationprimer.com

PLC Programming Language Decisions

When it comes to evaluating PLC programming languages, it’s important to realize you’ll likely use more than one. That’s why it’s key to pick the right programming tools for the job.

Enabling Human-Centric Manufacturing through Digital Operations

While discussion about AI and smart manufacturing abound, they are less common in practice. TilliT’s James Balzary shares some tips on how companies can begin applying digital technology to their operations.

How SaaS and MaaS Impact Industry

From lowering barriers to entry to changing capex and opex strategies, software and machines as-a-service are changing the business of technology and manufacturing.

Getty Images 1253521425

Emerson’s Zedi Cloud Moves to Microsoft Azure

According to Emerson, The move of Zedi Cloud to Microsoft Azure allows for easier scalability, improved safeguarding of critical business assets, and the achievement of environmental, social, and governance goals.

Iveco Reduces Worker Injuries with Wearable Exoskeletons

Vehicle manufacturer Iveco has been successfully outfitting assembly workers with Comau’s Mate exoskeleton since 2018.

Screen Shot 2022 04 28 3

Delphon Puts Robots-as-a-Service to Work

Delphon hires the Rapid Machine Operator from Rapid Robotics to improve production in its TouchMark and Gel-Pak operations.