High-Speed Wireless Ethernet Bridge

Indoor/outdoor 5 GHz GhostBridge wireless Ethernet bridge creates a transparent, secure, high-speed (up to 150 Mbps), point-to-point link between two remote devices or networks with a line-of-sight range up to 15 km.

Aug 1st, 2011

Aw 274 1108 Np08 Bb Ghost

Sold in pre-configured pairs, the GhostBridge requires no further configuration or software setup; mount them, plug them into the network using the included PoE adapters, and then use the LED indicators to align them. A PoE pass-through Ethernet port also allows users to connect remote devices (such as an IP camera) to a local area network. An 80-degree, 15dBi sector antenna is integrated into the housing. The operating frequency is 5470 – 5825 GHz, the unit consumes 8 watts maximum power, and it comes pre-configured with WPA2, 128-bit security.

B&B Electronics Manufacturing Co.
www.bb-elec.com
800.346.3119

Getty Images Fingerprint

A Digital Fingerprint to Combat Counterfeit Goods

Alitheon’s optical artificial intelligence system can authenticate products by simply taking a picture.

Brian May Hi Res Photo

Manufacturing in the Metaverse

The emerging metaverse continuum will transform how people interact with each other and with business data. Find out how this might impact industrial and manufacturing operations.

The HG-KR23K servo puts motion control logic within the drive itself, taking the load off of the PLC and simplifying programming.

Precise Automation Required for Pick-and-Pack Machine

Using Mitsubishi Electric servo motors and intelligent drives enabled Hamrick Manufacturing to create a machine with a lower cost controller that reduced changeover times by nearly 98%.

Screen Shot 2022 06 06 At 10 50 17 Am

Creating the Monetary Information to Measure Equipment Efficiency Improvements

This column presents a simple example of the type of information needed to address the common deficiencies in typical financial accounting information.

Screen Shot 2022 05 19 At 12 42 59 Pm

Palletizer Upgrade? It’s Likely Overdue

Learn what you can to do upgrade and maintain your palletizing machines.

Screen Shot 2022 06 06 At 10 21 27 Am

Siemens Digital Industries Software Focuses on Digital Transformation

Lean about what what shared at Siemens Digital Industries Software's analyst/media event this year.

The Raytek Marathon MM infrared temperature sensor from Fluke Process Instruments.

Sensors Help Increase Batch Capacity

Non-contact infrared sensors enabled global plastics and rubber processor Ilpea Industries Inc. to increase yields and reduce cycle times.

Michael Lehrich

The Significance of Historians

As the importance of data grows across industry, more attention needs to be paid when picking a data historization platform.

The Evolution of Robotics Engineering

Otto Motors and HP offer simulation and 3D printing technologies to improve robot performance.

Getting supply chain management and planning right is one of the most effective shock absorbers any food and beverage processor can have, shielding them from fluctuations in availability and demand.

How to Tame an Unpredictable Supply Chain

Supplies are being disrupted both coming and going for food and beverage manufacturers. Shifting philosophies, combined with a range of digital technologies, could help make operations more predictable and resilient.

Digital Twin image. Source: Siemens Digital Industries Software

Digital Twin Application Considerations

From the reach of the digital twin technology you choose to costs and data preparation issues, there are a number of factors to consider when looking to put a digital twin into practice.

KUKA Robotics AGILUS KR 3 R540 Robot Kit

KUKA Robotics AGILUS KR 3 R540 Robot Kit

The AGILUS series is a comprehensive family of small robots. Their performance is unrivaled in their payload categories featuring six axes, high speed, short cycle times, and an integrated energy supply system.

Enabling Human-Centric Manufacturing through Digital Operations

While discussion about AI and smart manufacturing abound, they are less common in practice. TilliT’s James Balzary shares some tips on how companies can begin applying digital technology to their operations.

How SaaS and MaaS Impact Industry

From lowering barriers to entry to changing capex and opex strategies, software and machines as-a-service are changing the business of technology and manufacturing.

Getty Images 1253521425

Emerson’s Zedi Cloud Moves to Microsoft Azure

According to Emerson, The move of Zedi Cloud to Microsoft Azure allows for easier scalability, improved safeguarding of critical business assets, and the achievement of environmental, social, and governance goals.

Iveco Reduces Worker Injuries with Wearable Exoskeletons

Vehicle manufacturer Iveco has been successfully outfitting assembly workers with Comau’s Mate exoskeleton since 2018.

Screen Shot 2022 04 28 3

Delphon Puts Robots-as-a-Service to Work

Delphon hires the Rapid Machine Operator from Rapid Robotics to improve production in its TouchMark and Gel-Pak operations.

Implementation of a Data Pump with Ignition

A “data pump” approach to historicizing data can be advantageous in batch operations that require highly detailed records be kept.

Private 5G for Industrial Environments

Following major deployments by TCL Manufacturing, Volkswagen, and British Sugar, 5G is continuing to gain steam.

一台机器的风险评估是什么?

学习机器的细节的风险评估,世界卫生大会t types of equipment require them, who's responsible for them, when to begin the process, and how to comply with machine risk assessment regulations in this episode featuring Schmersal USA's Devin Murray.

More in Home

4 Questions to Ask About Industrial Cybersecurity Software

From regulatory compliance and configuration security to potential downtime impacts, Gabe Authier of Tripwire highlights the major issues to address when evaluating cybersecurity software.

Getty Images 1194981755

TSN Plugfest Focuses on Interoperability

Participants in Avnu Alliance’s Time-Sensitive Networking plugfest test their deployments in a collaborative environment.

Matt Rendall, CEO and co-founder of Otto Motors, speaking at the Robotics Summit & Expo in Boston.

Moving Robots Into the Matrix

Otto Motors uses simulation to mitigate risk when deploying a fleet of autonomous mobile robots.

Fieldbus organizations like the EtherCAT Technology Group acknowledge the value of OPC UA and see it as a complementary standard in industrial control networking. Courtesy: EtherCAT Technology Group

How OPC UA Creates Interoperability and Gives Data Context

This second installment in a four-part series on key industrial network technologies explains why OPC UA continues to be recognized as the global interoperability method of choice for industrial automation technologies.

Proficy Historian For Cloud 3200x1404

The First Cloud-Native Data Historian

GE Digital stakes a claim to the world’s first cloud-native operational data historian with the release of its Proficy Historian for the Cloud on the AWS Marketplace.

Retrofit or Upgrade: What’s Best for Your Facility?

When undertaking a controls project, beginning with an installed base evaluation can help determine if a retrofit or complete upgrade will be more advantageous in the long run.

Security Alert for Industrial Control Systems

U.S. Government issues warning about new cyberthreats that impact control systems and SCADA devices across industries.

Screen Shot 2022 05 14 At 4 56 45 Pm

Managing Network Security on Your Plant Floor

A safe and secure network is paramount to ensuring a company’s ability to thrive in today’s digital age. Simply making the change from an unmanaged switch to a lean managed industrial switch could be the key to saving you from a cyber-attack.

Advantages of a Smart MQTT Broker

Understanding how a smart MQTT broker provides ways to aggregate data streams, keep them consistent, and distribute them securely across a complex network to ensure the success of Internet of Things projects of any size or complexity.

Screen Shot 2022 05 14 At 4 37 18 Pm

Answering the Top 7 Questions About Profinet

We get a lot of questions here at PI North America from end users, distributors, system integrators, and device vendors. Here are our answers to the questions we get asked most.

Connecting Cloud-Based Quality Control to the Edge

Intrinsics Imaging’s AI-powered vision system uses edge I/O to integrate cloud analytics into process controls.

0522 Iiot eh Williams

Effective Instrument Commissioning for Seamless Project Startups

Finishing a major automation project on time and on budget depends on putting the best digital tools in the hands of highly skilled people.